Plastic media Blasting is a safe effective and environmentally friendly method of removing paint from any metal or fiberglass surface.

 All blasting is done in an enclosed room so that all media can be   reclaimed and recycled.

This equipment was originally developed for the military to strip paint from aircraft & other equipment needing to be repainted.

The operator wears protective headgear, coveralls & gloves while blasting.

We use a high volume of air at a low pressure to push the plastic media through the nozzle. Because the pressure is so low, this will not pit or warp most metal surfaces. Also it does not remove the original protective coatings from the surface.

Special care must be taken with Aluminum or fiberglass.

Here is the end result, a clean smooth surface. A little bit of edge sanding and you are ready for primer.

We can strip most anything metal, and even some fiberglass. Below are some antique tin ceiling tiles.